Product Summary
diodes has been designed and optimized for use in small signal (Pin <-20 dBm) applications
at frequencies below 1.5 GHz. They are ideal for RF/ID and RF Tag applications where
primary (DC bias) power is not available.
Important Note: For detector applications with input power levels greater than –20 dBm,
use the HSMS-282x series at frequencies below 4.0 GHz, and the HSMS-286x series at
frequencies above 4.0 GHz. The HSMS-285x series IS NOT RECOMMENDED for these
higher power level applications.
Available in various package configurations, these detector diodes provide low cost
solutions to a wide variety of design problems. Avago’s manufacturing techniques assure
that when two diodes are mounted into a single package, they are taken from adjacent
sites on the wafer, assuring the highest possible degree of match.
Image | Part No | Mfg | Description | Pricing (USD) |
Quantity | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
HSMS-2852 |
Other |
Data Sheet |
Negotiable |
|
||||||||||||||
HSMS-2852-BLKG |
Avago Technologies |
RF Detector RF/ID below 1.5GHz |
Data Sheet |
|
|
|||||||||||||
HSMS-2852-TR1G |
Avago Technologies |
RF Detector RF/ID below 1.5GHz |
Data Sheet |
|
|
|||||||||||||
HSMS-2852-TR2G |
Avago Technologies |
RF Detector RF/ID below 1.5GHz |
Data Sheet |
|
|
|||||||||||||
HSMS-2852-TR1 |
DIODE SCHOTTKY DETECT 2V SOT-23 |
Data Sheet |
Negotiable |
|